Hanna-instruments HI 9017 Bedienungsanleitung PDF herunterladen (Seite 14)

32.7

TEMP

°C

For the rinsing process, it is recommended to use a liberal amount of

the next solution to be measured.

Using refillable electrodes

Unscrew the small refill cap to open the refill hole during measure-

ments. After measurements replace the refill hole cap.

This will increase the pressure and give a faster response.

FOR HI 9218, HI 9219, HI 9318 ONLY

Press the PRINT key to get a printout at any time.

All the printouts will be complete with date, time,

sample No. (for HI9318 only), temperature and pH

(or mV with HI9318 only) value.

HI9218/HI9219 HI9318

Sample Printouts

MANUAL TEMPERATURE COMPENSATION

When the temperature probe is not connected, take the temperature of

the solution with a ChecktempC or a glass thermometer.

FOR HI 9017 ONLY

To manually set a temperature value (e.g. 37.2°C)

proceed as follows:

• press 3

• press 7

• press the key displaying decimal point "."

• press 2

• press TEMP

DATE : 01-02-96

TIME : 12:21 Hr

°C : 17.9

pH : 7.18

DATE 1/02

TIME 12:21

SAMPLE 1

°C 17.9

pH 7.18

°C

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 63 64

Keine Kommentare

Hanna-instruments HI 9017 Bedienungsanleitung Seite 14