Hanna-instruments HI 9017 Bedienungsanleitung Seite 13
- Seite / 64
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
13
pH°C
4 cm
(1½
")
TAKING PH MEASUREMENTS
Make sure that the instrument has been calibrated for pH before
taking pH measurements (see page 18).
Connect the pH electrode (combination-type) or the electrode half cells
to the appropriate connectors on the rear panel (see page 11).
If automatic temperature compensation is required, connect the
HI7669/2W temperature probe to the proper socket on the rear panel
(see page 11).
Press the ON key to turn the meter on. The meter will
automatically default to the pH measurement mode.
Immerse the electrode and the temperature probe
in the sample and shake briefly. Wait for 30
seconds before taking readings.
IN HI 9218 AND HI9219
Press READY: "YES" confirms the read-
ing is stable.
The LCD on the right shows the pH reading compensated for tempera-
ture. The temperature reading is displayed on the LCD on the left.
Note: the electrode should be submerged approxi-
mately 4cm (1½") into the solution.
If the temperature probe is used, it should be
located as close to the pH electrode as possible.
If measurements are taken in different samples successively, it is
recommended that the electrode is rinsed thoroughly for better condi-
tioning and to eliminate cross-contamination of the sample.
ON
ON
READY
OPERATIONAL GUIDEOPERATIONAL GUIDE
OPERATIONAL GUIDEOPERATIONAL GUIDE
OPERATIONAL GUIDE
- HI9017 - HI9218 1
- HI9219 - HI9318 1
- ISO 9000 Certified 2
- Company since 1992 2
- TABLE OF CONTENTS 2
- PROGRAMS 5
- @ 20°C/68°F) ISE ±0.2 mV 6
- Foodcare 7
- @20°C/68°F) °C ±0.5 8
- SAMPLE DATE 9
- REAR PANEL CONNECTIONS 11
- OPERATIONAL GUIDE 13
- FOR HI 9017 ONLY 14
- FOR HI 9218 AND HI 9219 ONLY 15
- FOR HI 9318 ONLY 15
- TAKING ORP MEASUREMENTS 16
- AFTER MEASUREMENTS 17
- PH CALIBRATIONPH CALIBRATION 18
- PH CALIBRATION 18
- PH CALIBRATION FOR HI9318 23
- Calibration com 24
- DD-MM-YY 27
- PROGRAMS OF HI9017 28
- PROGRAM # 1 (HI 9017) 29
- PROGRAM # 2 (HI 9017) 31
- PROGRAM # 3 (HI 9017) 32
- PROGRAM # 4 (HI 9017) 33
- PROGRAM # 5 (HI 9017) 35
- PROGRAM #6 (HI9017) 36
- PROGRAM #1 (HI9318) 37
- PROGRAM #2 (HI9318) 39
- PROGRAM #3 (HI9318) 40
- PROGRAM # 4 (HI9318) 41
- PROGRAM #5 (HI9318) 41
- PROGRAM #6 (HI9318) 42
- PROGRAM #7 (HI9318) 43
- PROGRAM #8 (HI9318) 44
- PROGRAM #9 (HI9318) 44
- TROUBLESHOOTING GUIDE 45
- INTERFACE WITH COMPUTER 46
- TYPE OF COMMANDS 47
- INTERFACE WITH PC 48
- PREPARATION 50
- MEASUREMENT 51
- PERIODIC MAINTENANCE 51
- CLEANING PROCEDURE 52
- TROUBLESHOOTING 52
- ACCESSORIESACCESSORIES 54
- ACCESSORIES 54
- ORP PRETREATMENT SOLUTIONS 55
- "S" VERSION 56
- 2.95" 57
- 0.25" 57
- HALF-CELL ELECTRODES: 58
- ORP ELECTRODES: 59
- HI3131B / HI3111S 59
- HI3230B / HI3210S 59
- HI4430B / HI4410S 59
- POWER UNITS: 60
- OTHER ACCESSORIES 60
- B = BNC-type connector 61
- S = Screw-type connector 61
- WARRANTYWARRANTY 62
- WARRANTY 62
- CE DECLARATION OF CONFORMITY 63
- ENVIROCARE GENERAL CATALOG 64
Verwandte Produkte und Handbücher für Messgeräte Hanna-instruments HI 9017
(17 Seiten)Wilbur-curtis WB-14-11 manuali
Manuali dei proprietari e guide per l'utente per Bollitori per acqua Wilbur-curtis WB-14-11.
We fornisce 1 manuali pdf Wilbur-curtis WB-14-11 per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Kommentare zu diesen Handbüchern