Hanna-instruments HI 931100 Bedienungsanleitung Seite 9

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 17
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 8
1716
To quit the calibration and save
the first point, press the CAL
key.
For better accuracy however, it is recommended
that a two-point calibration is performed.
TWO POINT CALIBRATION
After the first point is confirmed,
immerse the FC300B electrode
into the second solution:
HI7085 at 0.3 g/L NaCl or
HI7081 at 30 g/L NaCl.
Note: The electrode should be
immersed approximately
2.5 cm (1") into the so-
lution.
Select the second point value
by pressing the BUF key. Make
sure that the selected value cor-
responds to the one being used
for the second calibration point.
If the reading is not close to
the selected value, the "BUF"
symbol will blink.
Otherwise, if the reading is
close to the selected value, the
meter will recognize the stan-
dard solution. Only the " "
symbol will blink, to indicate
that the reading is stabilizing.
Once stabilized "CON" symbol
will appear on the display.
For best results, wait for a
couple of minutes and press
the CFM key.
The two point calibration is now
completed and the meter re-
turns to the normal mode.
CAL
BUF
SINGLE POINT CALIBRATION (OFFSET)
Dip the FC300B sodium elec-
trode into the HI7083 (3.00 g/L
NaCl) solution.
Note: Immerse the electrode
approx. 2.5 cm (1") into
the solution.
Press the CAL key. The "CAL" and "BUF" indi-
cators will be displayed with the "BUF" and the
" " symbols blinking.
As soon as the standard solu-
tion is recognized, only the
" " symbol will continue
blinking to indicate that the elec-
trode is stabilizing.
The value of the standard solu-
tion being used will be displayed
on the primary LCD.
As soon as the electrode is sta-
bilized, "CON" symbol lights up.
For best results, wait for a couple
of minutes before pressing the
CFM key.
HI 931100 will then display "30.0
gm".
CAL
gm
°C
NaCl
BUF
CAL
CFM
CFM
Seitenansicht 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Kommentare zu diesen Handbüchern

Keine Kommentare