Hanna-instruments HI 121 Bedienungsanleitung PDF herunterladen (Seite 37)

• If RCL mode was invoked while the instrument was in ISE channel: the

last ppm or Rel mV memorized reading on the primary LCD and the

lot number on the secondary LCD.

Note: If LOG mode was invoked while the instrument was in mV/Relative

mV measurement range, the corresponding memorized reading will

be displayed on the primary LCD, along with “RelmV” tag.

Press 2nd then SET key while in RECALL mode and the instrument will toggle

between the lot or record number on the secondary LCD. Use the ARROW

keys to select another lot or record.

Press MODE or from the left keyboard and the instrument will

display the next logged parameter as shown in the table below:

Notes: • If pressing

from the left keyboard, the previous logged

parameter will be displayed.

• If in Rel mV RECALL mode regarding the slope, the instrument

will display “----” message on the primary LCD.

• The record number refers to an identification number inside a lot.

Last displayed parameter is “dEL” message on the primary LCD and the lot

number on the secondary LCD.

OFFSET Offset value Lot (or record) number

TIME Hour & minutes Seconds

DATE Year Month & day

Parameter Primary LCD Secondary LCD

SLOPE Slope value Lot number (Ion charge for ISE range)

mV mV reading Temperature

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 59 60

Keine Kommentare

Hanna-instruments HI 121 Bedienungsanleitung Seite 37