Hanna-instruments PCA 300 Series Bedienungsanleitung PDF herunterladen (Seite 15)

Direct routing of sample lines is also recommended.

If the large process pipes are horizontal, taps should be in-

serted vertically in the middle of the pipe to avoid pulling

sediment from the bottom or air bubbles from the top of

the pipe into the sample line.

A 1/2” BSP sample input fitting allows direct connection to

the optional input filter.

Sample line pressure should be between 0.07 and 4 bar (1

and 57.2 psig) with an ideal pressure of 0.7 bar (10 psig).

Drain Line Installation

The drain hose fitting is a 20 mm (3/4”) hose barb on the

bottom of the instrument enclosure. An air gap between the

end of the drain hose and the drain is recommended to prevent

any back flow into the instrument in the event of drain block-

age.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 59 60

Keine Kommentare

Hanna-instruments PCA 300 Series Bedienungsanleitung Seite 15