Hanna-instruments HI 93414 Bedienungsanleitung PDF herunterladen (Seite 26)

SINGLE SAMPLE READ

• Remove the cuvette from the instrument.

• Remove the cap.

• Add the content of one packet of the specific

test reagent, for:

Free Chlorine Total Chlorine

1 packet of or 1 packet of

HI 93701-0

HI 93711-0

• Replace the cap and shake gently for 20 seconds

(or 2minutes in case of seawater analysis).

• Replace the cuvette into the holder and ensure

that the mark on the glass is matched with the

mark on the instrument top. Close the lid.

• Hold READ/TIMER u for 3 seconds. The

display will show the hourglass blinking and

the countdown prior to measurement.

Alternatively wait for:

Free Chlorine Total Chlorine

1 minute or 2 minutes and 30 seconds

and then just press READ/TIMER u.

• In both cases blinking dashes will appear during

measurement.

• The instrument directly displays the concentration

in mg/L of free or total chlorine.

Note:If the value is over range, the maximum

value (5.00 mg/L) will blink.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

Keine Kommentare

Hanna-instruments HI 93414 Bedienungsanleitung Seite 26