Hanna-instruments HI 83200-01 Bedienungsanleitung PDF herunterladen (Seite 33)

64 65

Hydrazine

HYDRAZINE

SPECIFICATIONS

Range 0 to 400 µg/L

Resolution 1 µg/L

Accuracy ±4% of full scale

Typical EMC ±2 µg/L

Deviation

Light Source Tungsten lamp with narrow band interference filter @ 420 nm

Method Adaptation of the

ASTM Manual of Water and Environmental Technology, method

D1385-88,

p-Dimethylaminobenzaldehyde method. The reaction between hydrazine

and the liquid reagent causes a yellow tint in the sample.

REQUIRED REAGENT

Code Description Quantity

HI 93704-0 Liquid Reagent 24 drops

REAGENT SETS

HI 93704-01 Reagents for 100 tests

HI 93704-03 Reagents for 300 tests

For other accessories see page 128.

MEASUREMENT PROCEDURE

• Select the

Hydrazine

method using the procedure described

in the

Method Selection

section (see page 12).

• Fill one cuvette up to the mark with 10 mL of distilled water.

• Place the cap, insert the cuvette # 1 into the holder and

close the lid.

• Press the Blank function key to start adjusting the light level.

The display will show “Blank Done” when the meter is ready

to take a zero measurement.

• Fill a second cuvette with 10 mL of unreacted sample (up to the

mark) and replace the cap.

10 mL

# 1

10 mL

# 2

# 1

Hardness Mg

• Press the  or  to access the second level of functions.

• Press the Chem Frm functional key to convert the result in mg/L of Magnesium (Mg).

• Press the Unit functional key to change the current measurement unit. The results can be converted to

French degrees (°f), German degrees (°dH) and English degrees (°E).

• Press the  or  to go back to the measurement screen.

Note: This test will detect any magnesium contamination in the beakers, measuring syringes or sample

cells. To test cleanliness, repeat the test multiple times until you obtain consistent results.

SAMPLE DILUTION

This meter is designed to determine hardness typically found in water purification systems. In order to

measure samples with high hardness, follow dilution procedure explained on page 61 (Ca Hardness).

INTERFERENCES

Interference may be caused by excessive amounts of heavy metals.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 66 67

Kommentare zu diesen Handbüchern

Keine Kommentare

Hanna-instruments HI 83200-01 Bedienungsanleitung Seite 33

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messgeräte Hanna-instruments HI 83200-01