Hanna-instruments HI 3220 Bedienungsanleitung PDF herunterladen (Seite 17)

• When the reading is stable and close to the selected buffer, the Confirm

function key is displayed.

• Press Confirm to confirm calibration.

• The calibrated value and the third expected buffer value will be dis-

played.

• After the second calibration point is confirmed, immerse the pH electrode

and the temperature probe approximately 3 cm (1¾”) into a third buffer

solution and stir gently. The temperature probe should be close to the pH

electrode.

• If necessary, press the ARROW keys to select a different buffer value.

• The “ ” tag will blink on the LCD until the reading is stable.

• When the reading is stable and close to the selected buffer, the Confirm

function key is displayed.

• Press Confirm to confirm calibration.

Repeat this procedure with two additional pH buffers to encompass the entire

sample pH range.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 67 68

Keine Kommentare

Hanna-instruments HI 3220 Bedienungsanleitung Seite 17