Hanna-instruments HI 120 Bedienungsanleitung PDF herunterladen (Seite 34)

Press MODE or from the left keyboard and the instrument will

display the next logged parameter as shown in the table below:

Notes: • If pressing

from the left keyboard, the previous logged

parameter will be displayed.

• If in Rel mV RECALL mode regarding the slope, the instrument

will display “----” message on the primary LCD.

• The record number refers to an identification number inside a lot.

Last displayed parameter is “dEL” message on the primary LCD and the lot

number on the secondary LCD.

Notes: • The “LdM” message on the secondary LCD shows that data

has been stored in Log on demand mode.

• Pressing 2nd then SET key, the instrument toggles between lot

number, record number (Log on demand only) or all lots.

• Press CLR to delete the selected lot/record or all lots.

Note: Positions remain free in the Log on demand lot by deleting the last

logged samples or all the lot.

• If “dEL ALL” option was selected, all logged data is deleted and the

instrument returns to measurement mode.

Press RCL at any time to return to measurement mode.

OFFSET Offset value Lot (or record) number

TIME Hour & minutes Seconds

DATE Year Month & day

Parameter Primary LCD Secondary LCD

SLOPE Slope value Lot (or record) number

mV mV reading Temperature

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 55 56

Keine Kommentare

Hanna-instruments HI 120 Bedienungsanleitung Seite 34